Home
 
Scuba
 
Fire
 
Paintball
 
Parts
 
FAQ
 
Contact
 
Diver's Depot
 
SCBA and SCUBA Dual Service Compressors
 


 
Lightweight Portable Compressors
 
Junior II lightweight portables, complete with air purification system and fill hose, are safe, reliable three stage compressors designed for serious sport divers.
 
Standard Features
  • BAUER P0 Breathing Air Purification System
  • Belt guard designed to meet OSHA guidelines
  • Inlet filter
  • Vibration Isolators
  • High temperature switch( JRII-G)
  • 5-foot fill hose assembly with SCUBA yoke, bleed valve and pressure gauge
Optional Features
  • Visual CO/Moisture monitor
JRII-E1 Electric Motor Drive (single phase)
JRII-E3 Electric Motor Drive (three phase)
JRII-G Gasoline Engine Drive
 
JRII-EY Electric Motor Drive Yachting Package:
Supplied with heavy duty stainless steel base, stainless steel inner frame, stainless steel fittings, magnetic starter, power-on light, high temperature switch, final pressure switch, hourmeter, On/Off switch, automatic condensate drain and NEMA 4x enclosure.
 
Model Charging Rate SCFM* FAD** HP RPM Dimensions
L-W-H
Weight Lbs
JRII-E1/115 2.9 2.5 2.0 1500 26-14-17 92
JRII-E1 3.9 3.2 3.0 2100 26-14-17 89
JRII-E3 3.9 3.2 3.0 2100 27-14-17 111
JRII-G3 4.3 3.6 5.0 2300 30-14-17 92
JRII-E1Y/115 2.9 2.5 2.0 1500 32-18-23 130
JRII-E1Y 3.9 3.2 3.0 2100 32-18-23 130
JRII-E3Y 3.9 3.2 5.0 2100 32-18-23 130

 
*Based on recharging an 80-cubic-foot tank from 500 to 3000 PSIG
**Compressor capacity referenced to standard inlet conditions
 
NOTE: JRII is designed for filling an individual SCUBA or SCBA. It is neither designed nor intended for filling cascade storage systems of any kind.

5000 PSI Service - Alternative Design Portables
 
Oceanus
Standard Features
  • BAUER P0 breathing air purification system
  • Belt guard designed to meet OSHA guidelines
  • Sturdy, long lasting low pressure oil pump
  • Large oil sump allows shipboard inclination of 30° (20° gas drive)
  • High temperature switch(Oceanus-G)
  • Inlet filter
  • Corrosion-resistant coolers
  • Vibration insulators
  • 5-foot fill hose assembly with SCUBA yoke, bleed valve and pressure gauge
Optional Features
  • Visual CO/Moisture monitor
Model Charging Rate SCFM* FAD** HP RPM Dimensions
L-W-H
Weight Lbs
Oceanus E1 4.9 4.1 5.0 2300 26-17-17 111
Oceanus E3 4.9 4.1 5.0 2300 26-17-17 120
Oceanus G 4.9 4.1 5.0 2300 30-14-17 96

 
*Based on recharging an 80-cubic-foot tank from 500 to 3000 PSIG
**Compressor capacity referenced to standard inlet conditions

Capitano II and Mariner II are three-stage, heavy duty portable models in a choice of electric motor, gasoline or diesel engine drive.
Standard Features
  • BAUER P0 breathing air purification system
  • Pressure switch (E/DV)
  • Stainless steel intercoolers and aftercooler
  • Motor starter with NEMA 12/13 enclosure (E/DV)
  • High temperature switch(E/DV and G/DV)
  • Inlet filter with flexible intake hose on all DV engine drive
  • HONDA gasoline engine (G/DV)
  • YANMAR diesel engine (D/DV)
  • Vibration insulators
  • 5-foot fill hose assembly with SCUBA yoke, bleed valve and pressure gauge
Model Charging Rate SCFM* FAD** HP RPM Dimensions
L-W-H
Weight Lbs
CII/DV-E1/E3 6.0 5.0 5.0 1250 46-22-24 280
CII/DV-G 6.0 5.0 5.0 1250 46-22-24 237
CII/DV-D 6.0 5.0 6.0 1250 46-22-24 277
MII/DV-E1/E3 8.4 7.0 7.5 1250 46-22-24 285
MII/DV-G 8.4 7.0 8.0 1250 46-22-24 260
MII/DV-D 8.4 7.0 8.0 1250 46-22-24 278

 
*Based on recharging an 80-cubic-foot tank from 500 to 3000 PSIG
**Compressor capacity referenced to standard inlet conditions

Open Vertical Designs
5000 - 6000 PSIG Electric Motor Drive

 
MIIV-E1 Electric Motor Drive
 
Available Features - 5000/6000 PSI
  • 5 foot SCBA or SCUBA fill hose assembly (3 stage models)
  • Power on light
  • High temperature shutdown switch
  • Belt guard designed to meet OSHA guidelines
  • Final pressure switch
  • UL listed electrical assembly
  • Hourmeter
     
  • Gauge panel
  • Oil switch
  • Automatic condensate drain
  • Purification upgrade
  • Fill manifold or CO monitor
  • Other equipment on request
Model Number of Stages Charging Rate SCFM* FAD** HP RPM Purification System Dimensions
L-W-H
Weight Lbs
5000 PSI Service
CIIV-E1/E3 3 6.0 5.0 5.0 1250 P0 29x44x56 610
MIIV-E1/E3 3 8.4 7.0 7.5 1250 P0 29x44x56 626
6000 PSI Service
H5V-E1/E3 3 5.0 4.0 5 1050 P2H Securus 29x44x56 630
H10V-E1/E3 4 9.7 8.1 7.5 1180 P2 29x44x56 720

 
*Based on recharging an 80-cubic-foot tank from 500 to 3000 PSIG
**Compressor capacity referenced to standard inlet conditions

H25V-E3 Electric Motor Drive
 
Standard Features - 5000/6000 PSI
  • BAUER P0 breathing air purification system
  • Automatic condensate drain system (K26V through K60V) 5000 PSI Standard 6000 PSI
  • Temp/oil pressure shutdown switch with panel mounted light
  • Belt guard designed to meet OSHA specifications
  • UL listed electrical assembly
  • Gauge Panel
  • Hourmeter
  • Securus® - K60/5000 PSI Standard 6000 PSI
     
Optional Features - 5000/6000 PSI
  • Automatic condensate drain (K13/K20)
  • Purification upgrade
  • Other features available upon request
  • Model Number of Stages Charging Rate SCFM* FAD** HP RPM Purification System Dimensions
    L-W-H
    Weight Lbs
    5000 PSI Service
    K20V-E3 4 20.4 17.0 15.0 1300 P4 35x40x56 800
    K26V-E3 4 26.4 22.0 20.0 1350 P5 42x40x56 900
    K36V-E3 4 36.0 30.0 25.0 1180 P10 42x62x72 1100
    K42V-E3 4 42.0 35.0 30.0 1300 P10 42x83x72 1200
    K60V-E3 4 60.0 50.0 40.0 1350 P12 Securus 42x83x72 2800
    6000 PSI Service
    H13V-E1/E3 4 13.0 10.8 10.0 1420 P2H Securus 42x40x56 700
    H19V-E3 5 19.2 16.0 15.0 1050 P5H Securus 42x40x56 920
    H25V-E3 5 25.2 21.0 15.0 1050 P5H Securus 42x40x56 920
    H27V-E3 4 27.5 23.0 25.0 1000 P10H Securus 42x62x72 1100
    H35V-E3 4 35.9 29.8 30.0 1200 P10H Securus 42x62x72 1300

     
    *Based on recharging an 80-cubic-foot tank from 500 to 3000 PSIG
    **Compressor capacity referenced to standard inlet conditions

    Mini Verticus
    5000-6000 PSIG - Three and Four Stage Designs

     
    Mini Verticus combines compressor, air purification and air quality monitoring system in a compact, vertical cabinet enclosure with sound attenuation designed to diminish operating noise level to less than 70 dBA. Capacities range from 6.0 to 10 SCFM charging rate with discharge pressures to up to 6000 PSIG.
     
    Standard Features - 5000/6000 PSI
    • BAUER Breathing Air Purification System
    • Securus® Electronic Moisture Monitoring System
    • Automatic condensate drain with recessed reservoir
    • High temperature and low oil pressure switch with fault light
    • UL listed electrical assembly
    • Pressure switch for automatic start/stop control
    • Forklift slots for easy maneuverability
    • Gauge panel
       
    Optional Features - Factory Installed
    • Fill manifold
    • CO monitor
    • Inlet filter maintenance indicator
    • Audible alarms for safety shutdowns
    • Emergency stop palm switch
    Model Number of Stages Charging Rate SCFM* FAD** HP RPM Purification System Dimensions
    L-W-H
    Weight Lbs
    5000 PSI Service
    mVT6-E1/E3 3 6.0 5.0 5.0 1250 P2 Securus 29x44x56 660
    mVT8-E1/E3 3 8.4 7.0 7.5 1250 P2 Securus 29x44x56 686
    mVT10-E1/E3 4 10.2 8.5 7.5 1180 P2 Securus 29x44x56 760
    6000 PSI Service
    mVT10-E1/E3 4 9.7 8.1 7.5 1180 P2H Securus 29x44x56 780

     
    *Based on recharging an 80-cubic-foot tank from 500 to 3000 PSIG
    **Compressor capacity referenced to standard inlet conditions

    Classic II
    5000/6000 PSIG -- Electric Motor Drive

     
    Classic II Enclosed A new line of High Pressure Breathing Air Compressor / Purification Systems. At the heart of this new design are our performance proven continuous duty air cooled compressors. Heavy duty formed sheet work provides a firm foundation for all pressure bearing components. The package is built to accommodate a 5000 or 6000 PSIG three, four or five stage compressor with discharge capacities from 6.0 SCFM Charge Rate* up to 26.4 SCFM Charge Rate*.
     
    *Based on recharging an 80 cubic foot tank from 500 to 3000 psig
     
    Standard Features
    • Industry First UL Listed® NEMA 4 Electrical Enclosure - Standard
    • PLC Controller
    • Power-On Light
    • High Temperature Shutdown Switch
    • Final Air Pressure Switch
    • Emergency Stop Switch
    • Hourmeter
    • Magnetic Starter
    • Powder Coat Paint - Assures a rugged finish as well as an aesthetically pleasing appearance
    Optional Features
    • Interstage Pressure Gauges Mounted Locally
    • Purification System Upgrades
    • Securus® Electronic Moisture Monitoring System
    • High-Low Fill Assembly
    • Dual Pressure Switch
    • Visual CO/Moisture Indicator
    • Electric Carbon Monoxide Monitor with Calibration Kit
    • Low (2216 or 3000 PSI) SCBA Fill Assembly, 5ft length
    • High (4500 PSI) SCBA Fill Hose Assembly, 5ft length
    • SCUBA Fill Hose Assembly, 5ft length
    • DIN (Genesis) SCUBA Fill Hose Assembly, 5ft length
       
    Model Block Number of Stages Charging Rate SCFM* FAD** HP RPM Dimensions
    L-W-H
    Weight Lbs
    5000 PSI Max Service
    CII-E1/E3 K100II 3 6.0 5.0 5 1250 53x35x33 690
    MII-E1/E3 K120II 3 6.0 5.0 7.5 1250 53x35x33 705
    K20-E3 K15 4 20.4 17.0 15 1300 58x35x38 975
    K26-E3 K18011 4 26.4 22.0 20 1350 58x35x38 1055
    6000 PSI Service
    H5-E1/E3 K100I-420 3 5.0 4.0 5 1050 53x35x33 710
    H10-E3/E3 K12.14II 4 9.7 8.1 7.5 1180 53x35x33 745
    H13-E1/E3 K12.14II 4 13.0 10.8 10 1420 53x35x33 750
    H19-E3 K18.1II 5 19.2 16.0 15 1050 58x35x38 1065
    H25-E3 K18.1II 5 25.2 21.0 20 1300 58x35x38 1075

     
    *Based on recharging an 80-cubic-foot tank from 500 to 3000 PSIG
    **Compressor capacity referenced to standard inlet conditions

    Verticus
    5000 - 6000 PSIG - Four and Five Stage Designs

     
    Verticus combines compressor, air purification and air quality monitoring system in a vertical cabinet enclosure with sound attenuation designed to diminish operating noise level to less than 79 dBA. Capacities range from 13.0 to 42.0 SCFM charging rate with discharge pressures up to 6000 PSIG.
     
    Standard Features - 5000/6000 PSI
    • BAUER breathing air purification system
    • Securus® electronic moisture monitor
    • Automatic Condensate drain with reservoir
    • Inlet filter maintenance indicator
    • Gauge panel
    • High temperature switch and low oil pressure switch with fault light
    • UL listed electrical assembly
    • Pressure switch for automatic start/stop control
       
    Optional Features - Factory Installed
    • CO monitor
    • Audible alarms for safety shutdowns
    • Emergency stop palm switch
    • Other options available upon request
    Model Number of Stages Charging Rate SCFM* FAD** HP RPM Purification System Dimensions
    L-W-H
    Weight Lbs
    5000 PSI Service
    VT13-E1/E3 4 13.3 11.1 10.0 1420 P2 Securus 43x46x58 800
    VT20-E3 4 20.4 17.0 15.0 1300 P5 Securus 43x46x58 900
    VT26-E3 4 26.4 22.0 20.0 1300 P5 Securus 43x46x58 1050
    VT42-E3 4 42.0 35.0 30.0 1300 P10 Securus 43x63x72 1500
    6000 PSI Service
    VT13H-E1/E3 4 13.0 10.8 10.0 1420 P2H Securus 43x46x58 830
    VT19H-E3 5 19.2 16.0 15.0 1050 P5H Securus 43x46x58 930
    VT25H-E3 5 35.9 21.0 20.0 1300 P5H Securus 43x46x58 1130
    VT35H-E3 4 35.9 28.9 30.0 1200 P10H Securus 43x63x72 1530

     
    *Based on recharging an 80-cubic-foot tank from 500 to 3000 PSIG
    **Compressor capacity referenced to standard inlet conditions

    Open Horizontal
    5000/6000 PSIG - For larger air requirements

     
    Open Horizontal compressors set the standard or larger capacity air requirements. All models are available in electric motor drive above 20HP. Capacities range from 27.5 to 140.0 SCFM charging rate with discharge pressures up to 6000 PSIG.
     
    Standard Features - 5000 PSI
    • Electric motor
    • Magnetic motor starter with overload protection and manual reset
    • Gauge panel
    • Compressor high temperature shutdown and panel mounted fault light
    • Panel mounted power-on light
    • Automatic condensate drain system with reservoir
    • Belt guard designed to meet OSHA standards
    • UL listed electrical assembly (electric motor driven models only)
       
    6000 PSI Standard Feature Identical to 5000 PSI EXCEPT:
    • Securus® Electronic Moisture Monitoring System (standard all models)
       
    Optional Features -- 5000/6000 PSI
    • CO Monitor
    • High-low fill assembly
    • Dual pressure switch
    • Other optional features available on request
    Model Number of Stages Charging Rate SCFM* FAD** HP RPM Purification System Dimensions
    L-W-H
    Weight Lbs
    5000 PSI Service
    K36-E3 4 36.0 30.0 30.0 1000 P10 80x32x48 1100
    K42-E3 4 42.0 35.0 35.0 1300 P10 80x32x48 1200
    K60-E3 4 60.0 2250.0 40.0 1350 P12 Securus 92x44x60 2800
    K80-E3 4 80.4 67.0 60.0 1225 P14 Securus¶ 126x56x66 4000
    K145-E3 4 145.0 121.0 100.0 1125 P14 Securus¶ 126x56x66 5000
    6000 PSI Service
    H27-E3 4 27.5 23.0 25.0 1000 P10H Securus 80x32x48 1100
    H35-E3 4 35.9 29.8 30.0 1200 P10H Securus 80x32x48 1200
    H80-E3 5 80.4 67.0 60.0 1180 P14H Securus 114x56x66 4000
    H96-E3 5 96.0 80.0 75.0 1100 P14H Securus 114x56x66 4500
    H132-E3 5 132.0 110.0 100.0 1500 P14H Securus 114x56x66 5000

     
    ¶Purification supplied separately for remote mounting
    *Based on recharging an 80-cubic-foot tank from 500 to 3000 PSIG
    **Compressor capacity referenced to standard inlet conditions

    Offshore
    5000 PSI Service

     
    Offshore Compressors are your best choice for offshore operations. Available in diesel engine driven and three phase electrical motor driven models and different purification systems.
     
    Standard Features - 5000 PSI
    Diesel Engine Driven
    • Diesel engine with electric start
    • Centrifugal clutch and speed control solenoid
    • Automatic condensate drain
    • Gauge panel
    • Compressor high temperature shutdown with light
    • Inlet particulate filter and maintenance indicator
    • On/Off Switch
    • Final air pressure switch
    • Spark arrestor Muffler
    • Lifting lugs
    • NEMA 4 Electrical enclosure
    • Power coated steel frame and cabinet enclosure
    • Anti-vibration mounts for engine
    • 316 Stainless Steel tubing
    • Stainless Steel fittings and high pressure instrument pipe fittings
       
    Standard Features -- 5000 PSI
    Electric Motor Driven
    • T.E.F.C. motor with starter
    • 460VAC/3PH/60HZ (other voltage and frequencies available on request)
    • Automatic condensate drain
    • Gauge panel
    • Compressor high temperature shutdown switch with light
    • Compressor low oil pressure shutdown with light
    • Inlet particulate filter and maintenance indicator
    • On/Off switch
    • Pressure Switch
    • Lifting Lugs
    • 316 Stainless steel tubing
    • Stainless Steel fittings, fixtures, fastening devices
    • Powder coated aluminum frame and cabinet enclosure
    • Emergency stop
    • NEMA 4 Electrics, UL listed electrical panel
    Diesel Engine Driven -- Horizontal Design
    Model Charging Rate SCFM* FAD** HP RPM Number of Stages Purification System
    K12.14II 010-D 10.2 8.5 10.0 1180 4 P2
    K15 020-D 20.4 17.0 20.0 1300 4 P4
     
    Electrical Engine Driven -- Vertical Design
    Model Charging Rate SCFM* FAD** HP RPM Number of Stages Purification System
    K12.14II 010-E3 10.2 8.5 7.5 1180 4 P2
    K15 020-E3 20.4 17.0 20.0 1300 4 P4

     
    *Based on recharging an 80-cubic-foot tank from 500 to 3000 PSIG
    **Compressor capacity referenced to standard inlet conditions
     
    Optional Equipment -- Installed at time of order only
    Description Part Number
    Electronic Carbon Monoxide Monitor complete with calibration kit wired for alarm and shutdown. Calibration gas included. /MNR-11 / CAL
    Hydrogen Sulfide Monitor with audible alarm - NEMA 4 /H2S MNR
    Purification System Upgrade from P4 to P5 /P4 to P5
    Securus® Electronic Moisture Monitoring System (available only with P2 or P5)  

    Engine Driven
    5000 - 6000 PSIG - Three, Four, and Five Stage Designs

     
    Horizontal Engine Drive Compressor for recharging SCBA or SCUBA cylinders combines compressor, purification system, and engine drive in frame designs specific to the requirements of the engine drive/compressor block assembly.
     
    Standard Features - 5000 PSI
    • BAUER breathing air purification system
    • YANMARS ail cooled diesel
    • High temperature shutdown switch (gas drive)
    • PLC control and centrifugal clutch (when you opt for electric start package)
       
    Optional Features - 5000 PSI
    • High temperature switch (diesel drive)
    • Final air pressure switch
    • Electric start package with speed control solenoid
    • Gauge panel including hourmeter
    • MITSUBISHI water cooled engine
    • PLC with NEMA 4 enclosure
    • Electric clutch, oil switch, and hourmeter
    • Automatic condensate drain (standard K26/K42/K60)
       
    Standard Features - 6000 PSI
    All of the above...plus:
    • Securus® electronic moisture monitor
    • Automatic Condensate Drain (all models)
    Model Number of Stages Charging Rate SCFM* FAD** HP RPM Purification System Dimensions
    L-W-H
    Weight Lbs
    ENGINE DRIVEN 5000 PSI Service
    CII-G 3 6.0 5.0 5.0 1250 P0 52x32x31 400
    CII-D 3 6.0 5.0 6.0 1250 P0 52x32x31 430
    MII-G 3 8.4 7.0 8.0 1250 P31 52x32x31 415
    MII-D 3 8.4 7.0 10.0 1250 P31 52x32x31 445
    K20-G 4 21.0 17.5 20.0 1300 P4 63x49x46 1500
    K20-D 4 21.0 17.5 27.0 1300 P4 63x49x46 1500
    K26-D 4 26.4 22.0 27.0 1350 P5 63x49x46 1500
    K42-D 4 42.0 35.0 44.0 1300 P10 95x52x49 3200
    K60-D 4 60.0 50.0 60.0 1350 P12 SECURUS 112x52x53 3750
    ENGINE DRIVEN 6000 PSI Service
    H5-G 3 5.0 4.0 5.0 1050 P2 Securus 52x32x38 475
    H5-D 4 5.0 4.0 6.0 1050 P2 Securus 52x32x38 480
    H10-G 4 9.7 8.1 11.0 1180 P2 Securus 52x32x38 650
    H10-D 4 9.7 8.1 10.0 1180 P2 Securus 52x32x38 650
    H13-G 4 13.0 10.8 13.0 1420 P2 Securus 52x32x38 700
    H13-D 4 13.0 10.8 18.0 1420 P2 Securus 63x49x46 1300
    H19-D 5 19.2 16.0 27.0 1050 P5 Securus 63x49x46 1500
    H25-D 5 25.2 21.0 27.0 1300 P5 Securus 63x49x46 1500
    H35-D 4 35.9 29.8 44.0 1200 P10 Securus 95x52x49 3200

     
    *Based on recharging an 80-cubic-foot tank from 500 to 3000 PSIG
    **Compressor capacity referenced to standard inlet conditions
    G = Gasoline Engine   D = Diesel Engine   Alternate drives available

    Unicus III - The Total System
     
    Unicus III Cylinder Recharging Station is the total system for recharging high or low pressure SCBA or SCUBA cylinders. The integrated system design combines a BAUER four or five stage high pressure compressor, BAUER breathing air purification system, air storage system, cascade fill panel and containment fill station into one user friendly workstation. Independently tested for safety, a UL listed electrical assembly and the proven reputation for superior performance makes the Unicus II the most advanced fill station available.
     
    Standard Features - 5000 PSI
    • Stainless steel gauge panel
    • Hinged stainless steel cascade fill control panel with laser cut directional fill schematic
    • Emergency stop switch
    • UL listed electrical assembly
    • Three position containment fill station
    • Fill station accommodates SCUBA cylinders up to 30" in overall length
    • Inlet filter maintenance indicator
    • Automatic condensate drain system
    • Condensate reservoir with automatic "Full" indication
    • Compressor low oil pressure and high temperature safety shutdowns with panel mounted fault lights
    • Two (2) ASME Code Stamped air cylinders in an Integral Rack designed for four (4) cylinders
    • Sound attenuating enclosure with slam-action latches and lift-off hinges
    Model Number of Stages Charging Rate SCFM* FAD** HP RPM Purification System Dimensions
    L-W-H
    Weight Lbs
    5000 PSI Service
    UNIII/20-E3 4 20.4 17.0 15.0 1300 P5 Securus 84x36x77 3750
    UNIII/26-E3 4 26.4 22.0 20.0 1350 P5 Securus 84x36x77 3825
    UNIII/42-E3 4 42.0 35.0 30.0 1300 P10 Securus 102x36/42x77 4500
    6000 PSI Service
    UNIII/10H-E3/E1 4 9.7 8.1 7.5 1180 P2H Securus 84x36x77 3550
    UNIII/13H-E1/E3 4 13.0 10.8 10.0 1420 P2H Securus 84x36x77 3650
    UNIII/19H-E3 5 19.2 16.0 15.0 1050 P5H Securus 84x36x77 3800
    UNIII/25H-E3 5 25.2 21.0 20.0 1300 P5H Securus 84x36x77 3895
    UNIII/35H-E3 4 35.9 28.9 30.0 1200 P10H Securus 102x36/42x77 4550

     
    *Based on recharging an 80-cubic-foot tank from 500 to 3000 PSIG
    **Compressor capacity referenced to standard inlet conditions

    Bauer Mobile Trailer Systems
     
    BAUER Mobile Trailer Systems offer an easily transportable, completely integrated breathing air system consisting of a compressor rated to 5000 or 6000 PSI powered with single or dual prime movers; electric, hydraulic, gasoline or diesel. Standard equipment includes:
    • Compressor with BAUER Breathing Air Purification System
    • ASME or DOT Storage System
    • System Control Panel
    • Air Control Panel
    • Containment Fill Station


     
    Containment Fill Station
    • Three position (2 position available)
    • Fill control panel
    • Built and tested to conform to NFPA 1901, 1999 Edition
    Air Storage
    • Mounted in steel base which provides valve protection

     
     
    Control/Fill Panels
    All panels illuminated for nighttime operation
    • Full compressor instrumentation
    • On/ Off switch for electric prime mover
    • High temperature switch with indicating light
    • Low oil pressure switch with indicating ligh
    • Hourmeter
    • Audible alarms
    • P-5 purification
    • SECURUS electronic moisture monitor
    • Four air storage gauges
    • Auto sequential cascade
    • Storage refill port
    • Carbon Monoxide monitor
    • Engine prime mover controls and fault light
    • Engine speed and idle control


     
    Tcom 13 or Tcom 26 mobile trailers -- A heavy-duty frame manufactured by BAUER assures a sturdy foundation for all pressure bearing components and provides years of service for its intended duty rather than commercial units adapted for the fire service. The enclosure ecompasses all of the system components including a 13 SCFM or 26 SCFM charge rate four stage 5000 PSI compressor.
     
    Standard Features
    • Unique Dual Drive System incorporating our Exclusive Belt Tensioning System
    • High Gloss Powder Coat Paint for a hard durable finish
    • Hydraulic Surge Brackes with Breakaway Activator
    • Hypalon Control Panel and Fill Station Cover
    • Two 5000 PSI DOT Air Storage Cylinders
    • Two-position Containment Fill Station
    Optional Packages
    • Optional Package A
      • Telescoping Light Mast with Four 500 Watt Fixtures
      • Snorkel Tube for Compressor Air Inlet with Light Mast
      • 7500 Watt Auxiliary Generator
    • Optional Package B
      • Spare Tire with Cover
      • Wheel Chocks
    • Optional Package C
      • 75 Foot Hose Reel
      • Interior Lights
    • Optional Package D
      • 2 5/16" Ball Hitch
    Model Block Charging Rate SCFM* FAD** HP RPM
    Tcom-13 K12.14 II 13.3 11.1 10 1420
    Tcom-26 K180 II 26.4 22.0 20 1350


     
    Tcom 13-H or Tcom 25-H mobile trailers -- A heavy-duty frame manufactured by BAUER assures a sturdy foundation for all pressure bearing components and provides years of service for its intended duty rather than commercial units adapted for the fire service. The enclosure ecompasses all of the system components including a 13 SCFM or 25 SCFM charge rate four or five stage 6000 PSI compressor.
     
    Standard Features
    • Unique Dual Drive System incorporating our Exclusive Belt Tensioning System
    • High Gloss Powder Coat Paint for a hard durable finish
    • Integral SCBA Storage for up to 12 SCBA Cylinders
    • Four ASME Air Storage Cylinders
    • Two-position Containment Fill Station
    • Roller Shutter Door Protection for the Operations Panel and Fill Station
    • Hydraulic Surge Brackes with Breakaway Activator
    Optional Packages
    • Optional Package A
      • Telescoping Light Mast with Four 500 Watt Fixtures
      • Snorkel Tube for Compressor Air Inlet with Light Mast
      • 7500 Watt Auxiliary Generator
    • Optional Package B
      • Spare Tire with Cover
      • Wheel Chocks with Fender Well Storage
    • Optional Package C
      • 75 Foot Hose Reel
      • Interior Lights
    • Optional Package D
      • 2 5/16" Ball Hitch
    • Optional Package E
      • 100.5" L x 5.5" H Sign Boards
    Model Block Charging Rate SCFM* FAD** HP RPM
    Tcom-13H K12.14 II 13.0 10.8 10 1420
    Tcom-25H K18.1 II 25.2 21.0 20 1300

    Containment Fill Stations
     
    BAUER offers only independently-tested Containment Fill Stations which were found to protect the operator from overpressure and fragmentation per NFPA 1901.
     
    Integrated Containment Fill Station CFSII-3S
    • Illuminated hinged stainless steel fill control panel
    • Cascade fill controls
    • Three fill positions each complete with cylinder scuff guard, SCBA fill connection, fill hose and bleed valve
    • 1/2" thick steel safety barrier for operator protection
    • Pneumatic fill door with slip resistant handle
    • Three point pneumatic safety door interlock
    • Rack and tubing to facilitate installation of up to four air storage cylinders.
    • Automatic storage bypass
    • 52 1/4" L - 36" W - 72 1/2" H
       

    Containment Fill Stations: Mobile CFS-2M/CFS-3M and Stationary CFS-2S/3S
    • Two or three fill positions complete with cylinder scuff guard, SCBA fill connection, fill hose and bleed valve
    • Three point pneumatic safety door interlock
    • 1/2" thick steel safety barrier for operator protection
    • Fill control panel with adjustable regulator, relief valve, manual control valve and pressure gauge for each fill station (S version only)
    • CFS M versions designed for use with remote air distribution panel
    • Mounted cascade panels available with single or dual function capability
    • 34 1/8" L - 20"W - 48 11/16" H (two fill position - CFS-2S/2M)
    • 44"L - 20"W - 48 11/16" H (three fill position - CFS-3S/3M)
    • Deeper version available (M or S) for near horizontal cylinder loading
       

    Containment Fill Stations: Mobile CFSII-1M and Stationary CFSII-1S
    • Single position containment fill station equipped with inlet pressure gauge, adjustable regulator, regulated pressure gauge, fill control valve, and fill pressure gauge
    • Ergonomic loading height
    • Reduced footprint
    • Door actuation requires less than 18lbs of force
    • True third party testing meeting NFPA 1901 (ask for details)
    • Bottom venting
    • Cascade controls available
    • Mobile or stationary configurations
    • Convenient door handle actuation
       

    BFP - Basic Fill Panel
    Designed for conversion to a cascade panel. Suitable for wall mounting or for attachment to DOT or ASME storage cylinders. Includes an adjustable regulator, inlet/outlet gauges, relief valve, fill control valves and inlet port for storage refill. Available with two or four fill whips.
     
    Briefcase Fill Panels
    Available in high and low pressure versions supplied in a lockable carrying case.
     
    Wall Mount Fill Control Panel
    BF450-FCP four bank fill control panel for dual function cascade control. Panel includes adjustable regulator, air inlet and outlet gauges, fill control valves, bank valves and gauges, and an air direction valve allowing single point air management.
     
    18"L 12"W 38"H
     

    Accessories

     
    Air Purification
     
    BAUER Air Purification Systems purify high pressure air to a quality that meets or exceeds the requirements of CGA pamphlet G-7, Compressed Air for Human Respiration, ANSI/CGA G-7.1, commodity specification for air, Grade D and E, and all other recognized standards for breathing air.
     
    5000 PSI Service
    Purification System Air Processing Capacity¹
    P0 3,200 cu ft
    P1 15,000 cu ft
    P2 40,000 cu ft
    P2 Securus 67,000 cu ft
    P4 60,000 cu ft
    P5 90,000 cu ft
    P5 Securus 150,000 cu ft
    P10 140,000 cu ft
    P10 Securus 150,000 cu ft
    P12 Securus* 420,000 cu ft
    P14 Securus* 650,000 cu ft
    6000 PSI Service
    Purification System Air Processing Capacity¹
    P2 Securus 67,000 cu ft
    P5 Securus 150,000 cu ft
    P10 Securus 150,000 cu ft
    P12 Securus 420,000 cu ft
    P14 Securus 650,000 cu ft
    * P12 and P14 only available with SECURUS
    ¹ Air Processing capacity based on standard inlet conditions, 68°f, a pressure of 14.70psia and a relative humidity of 36% (0.750 density)
     
    Securus® - The Patented Purification Moisture Monitoring System for Pure Breathing Air
    Securus ensures 100% utilization of the air processing cartridge because the sensor is embedded directly in the molecular sieve. The Securus cartridge, with its moisture sensor, is the last cartridge in the air processing system. Securus requires 115v electrical power for operation and connection to the compressor's control panel or to the Seccant controller for automatic warning and shutdown when the Securus cartridge becomes saturated. The Securus display can be mounted locally to the Securus cartridge chamber or to the compressor's control panel. Securus is available for working pressures from 2000 - 6000 PSIG and flow rates to 125 SCFM.
     
    Air Storage
     
    BAUER High Pressure Air Storage Systems meet the code requirements of either the Department of Transportation or the American Society of Mechanical Engineers. Storage systems are available with 4500 PSI and 6000 PSI DOT cylinders or 5250/7000 PSI dual rated ASME cylinders. Optional mounting racks are available.
    • ASME vessels with working pressures of 5000 PSI have a safety factor of 4 to 1
    • ASME vessels with working pressures of 6000 PSI have a safety factor of 3 to 1
    Vessel DOT 4500 PSI DOT 6000 PSI ASME 5000 PSI ASME 6000 PSI
    Material Lightweight Steel Alloy Lightweight Steel Alloy Steel ASME SA 372 Class V Type A AISI 4130 Steel ASME SA 372 Class V Type A AISI 4130
    Capacity 444 scf @ 4500 PSI 509 scf @ 6000 PSI 463 scf @ 5000 PSI 491 scf @ 6000 PSI
    Working Pressure 4500 PSI 6000 PSI 5000 PSI 6000 PSI
    Test Pressure 6750 PSI 9000 PSI 7875 PSI 10,500 PSI
    Diameter 9 5/16" 9 9/32" 9 5/16" 9 5/16"
    Height 55" with valve 55" with valve 54" without valve 54" without valve
    Weight 144 lbs 188 lbs 400 lbs 400 lbs
    Cylinder Valve DF DF Standard valve supplied Standard valve supplied
    Finish Primer and topcoat Primer and topcoat Primer and topcoat Primer and topcoat

    Disclaimer: www.BauerAir.com and www.ss.fm are not affiliated with Bauer Compressors, Inc.
    Bauer, Oceanus, Securus, Capitano II, Junior II, Mariner II, Unicus III, Triplex, and Classic II are all trademarks owned by Bauer Compressor, Inc. of Norfolk Virginia.
     
    eks@ss.fm